Specification of mold Application of mold Candle Wax Making Soap Making Crystal Epoxy,polymer,clay craft making Aroma plaster,concrete disffuer making chocolate ,cake making Material of mold 100% food grade silicone rubber Size/weight of final candle Size :100*45 mm(3.9*1.8 inch)Weight : 75 grams(2.7 oz) Feature of mold food gradenon-toxic,odorlesssoft & flexiblehigh temperature resistancetop quality & long lifetimeno shrinkage,no deformation How to use the 3D mold ? Making Resin Plaster Concrete Craft If you use the mold with hard material ,like resin ,plaster or concrete . You can demold it easily without damage . If you want to demold easily , you can try to cut the mold from one side. Making soap candle wax chocolate If you use the mold to make soap candle wax chocolate, we advise to cut the mold , so that you can demold easily without damage, because soap candle is not very hard like resin. Operate Instruction of 3D mold for demolding easily without damage. Step 1 : cut the mold Cut the mold at the side or back . Check the inside of mold and see where is the side or back . Don't cut the mold from the front .If cut the front side , the mold line will be left on the front of final candle , it will look not good. Step 2 : combine the mold Combine the mold with tape. We advise you use tape to combine the mold , tape is better than rubber bands, tape can keep the liquid from sticking out. Step 3 : pouring material Pouring the material We advise you pour half first , then rotate and shake the mold , so that the liquid can flow into everywhere of the mold and help to release the bubble. Step 4 : demolding Taking off the tape and demold Taking off the tape and demold carefully , then clean the molds for next use.